SeltzaTap Cartridge Change
Sparkling cartridge wear is indicated by a drip from the sparkling tap
Tools:
2.5 mm hex/allen key
Adjustable wrench
Video demo (4 mins)
- Turn water to the faucet off at the SeltzaHub valves
- Loosen set screw located on bottom of left-side Tap handle:
- Pull out cap
- Set screw is a 2.5mm hex
- Remove nut with an adjustable wrench
- Pull out the old cartridge
- Install the new cartridge, ensuring the tabs lineup as per the picture below
- Tighten nut back on (be sure not to over-tighten)
- Place the handle back into position
- Turn the water to the faucet back on at the SeltzaHub valves
- Test by running water in all 3 settings on the left-side handle. If flow seems too slow, slightly loosen the nut that holds cartridge in place.
- Re-tighten the set-screw in the handle and replace cap.
